Cable glands – connection and attenuation cable glands are used in many industry sectors. You will find yourself in the motor or pump construction, but also in the plant and machinery. Main task is water – and dust-proof recording of one or more cables which are to be introduced into the Interior of electronic or Electrotechnical part. What still distinguishes the cable glands and how do they work exactly? Including cable glands? Electrical equipment may in most cases don’t get wet, dusty or exposed to strong mechanical influence. Cable glands, which connect the cable to the housing firmly and absolutely tight it assume an important task. These cable glands must be flexible enough to meet the needs of different users. You must fit perfectly into the existing system and be able to fix different cable diameters. A special EMC cable gland not only ensures a connection between the system and cables to make it also protects the electronic components from electromagnetic radiation.

A special contact system facilitates this process. EMC cable glands work at the contact with the shielding of a cable a good EMC cable gland is very important. You create best possible derivation values that can vary considerably depending on the make and construction. Various designs and accessories are offered to improve the discharge values. So, for example, EMC locknuts and grounding rings are used, to achieve this goal. Consult by trained professionals, to find the EMC cable glands appropriate for your needs and accessories. The characteristics of good EMC cable glands produce a reliable connection between the connector housing and the cable shielding to good EMC cable glands.

A secure, long term contact must be absolutely guaranteed it. Why is the euro-top EMC vibration sure built by RST and allows a cable-friendly strain relief. In addition, a time-saving handling facilitates the application this cable gland. It is just as easy to handle as conventional fittings without contact system. During the installation, the cable thanks to a specific mechanism can be moved freely without causing damage to the shielding. Oliver Kalmey RST Rabe-system-Technik und Vertriebs GmbH

Wave solder optimizer description and the features of the oiptimizer. Wave soldering is soldering in the large-scale PCB’s the most modern manner. Apart from the fact that that it is the most advanced even the most efficient manner also. The process is wave soldering a collection of various procedures and the technical instruments work together. Now, there is a participation of the various processes and instruments it is crucial to monitor each of the wave soldering process. To the monitoring of the process and to optimize the every aspect of the process which wave solder optimizer the most useful instrument can be used, so that you the accurate performance data for the entire process. Wave optimizer plummet in the process of thermal profiling proves very handy. It is fast, efficient and production design; except for forming thermal monitors using the wave solder optimizer also profiling the defects that can plumb profiling process by wave and can be minimized, the loss they caused as minimum how possible to make.

The process of shaft raised also a big increase in the production of printed circuit boards, but with the increase in production has the cost of manufacturing lot for the manufacturer. Restaurant Michael Schwartz addresses the importance of the matter here. The error, which has increased also by the wave solder process and thus to minimize these disadvantages, the use of optimizer for the process through the process, it is important. Lot Optimizer offers the waves the current and accurate data for the ratio between the different aspects of the process, and so it is easy for manufacturers to consider, after the part of the process, which has not the advantages for the production. In modern times, wave is lot optimizer under the top devices for the collection of data for the Board-wave interaction. These data, which make it lot optimizer by the manufacturer possible for him / her to increase productivity through the Elimination of the deficiencies by the wave. The big advantage of this wave optimizer plummet adds that the process of wave soldering is that they can be used for the monitoring of two holed PCB soldering process or for PCB mounting. Just because of the wave soldering process is much faster as compared to the manual soldering process, so it is very important that we have a sharp look at the quality and quantity of the products manufactured by the process. This is where the shaft proves it utility lot optimizer. You cannot manually monitor the process so far is fast.