Covering PVC film involves several steps: Cleaning the dust and harvesting adhesive; After the glue blanks are placed on the table press on substrates covered by a sheet of PVC film and clamped around the perimeter of the table frame; looming dome with heating elements on the table with blanks, and heated to the desired temperature (depending on the type of film). The activation of the adhesive layer and the softening of the film; air is removed from the film, and upholstered piece crystallization of glue. After a period of time under pressure (from 2 to 6 min.) products extracted from the press and cut the excess film. Specifications of the facade of the MDF, PVC lined Characteristics Unit Value Thickness 16 mm (rarely 19) 780-790 kg/m3 density bending strength N/mm2 min. 22 tensile strength / scratches 0.5 N/mm2 tensile strength to cross N/mm2 tensile strength of 0.6 N/mm2 min. 1.0% humidity 6 Source: Based on data published in the media most common, functional facade is wrapping with PVC film. A huge variety of colors, textures and embossing of PVC film on the surface to simulate natural wood facade – and not just in appearance, but also to the touch.

PVC film can be used for laminating milled surfaces of furniture facades of MDF. PVC film adheres well and provides long-term operation in the interior. Films PVC made only from solid PVC, which does not contain plasticizers evaporating. Because of this, PVC has high thermal and chemical stability, high resistance to scratching, good lightfastness.